Lcd Monitor; Demo Mode - ITC HD7515 Manuel D'instructions

LCD Monitor

Your central vacuum unit is equipped with an electronic timing device that will
recommend proper maintenance of your vacuum system. These signals are only
suggestions and will do not indicate a problem with your vacuum system. They will
not stop or hinder the use of the vacuum.
1
2
3
4

DEMO MODE

Demo mode: to initiate a demonstration of the information center on the power
unit, press the reset button
press the reset button
16
c
Timer – indicates hours the unit has been
operated
d
required
e
Turbine
Without movement – unit is connected to a power
source
Movement – unit is turned on - operating
Speed of movement according to power level
chosen
5
f
Flashing Bag
Check the bag and change if necessary, or empty
6
the canister
g
Flashing Carbon Dust Filter
Replace filters
h
Reset – to stop the flashing icons, press the
reset button for one second.
h
for 5 seconds. To stop the demonstration, simply
h
.
Operating Instructions
– maintenance of the system is