Assembly Massage Head - SPORTSTECH F26 Mode D'emploi

ASSEMBLY MASSAGE HEAD

Note:the massage head is addtional device,you must spend addtional money to buy it if you need.
CAUTION & INSTRUCTION:
Before beginning a workout session ensure Safety Key is properly
attached onto the Console and Safety Clip is securely attached to an
article of your clothing. Always begin treadmill standing on the side rails not on the
running belt. Allow the treadmill to reach a speed of at least 1.0km/h, before walking
on the running belt.
1. Ensure this treadmill is plugged into 220 voltage which has a grounding plug.
2. Press the Power Switch located at the front of the treadmill (see page 5 ) to the ON
position, press "START/STOP" key, the machine will slow start.
3. On standby or running time, catch both side of heart inductor, the console screen
will show data of heart frequency. It will not show the data when catch just one side.
4. Pull off Safety Key for any emergency situation. The machine will stop
automatically within 5 seconds after pull off Safety Key.