Kohler Armoire murale Instructions D'installation page 6

4. Install the Shelves and Handles
Install the Shelves
Determine the desired height of the shelf inside the cabinet.
Insert the pegs into the side holes at the desired height.
Tilt the shelf and position inside the cabinet above the four pegs.
Rotate the shelf down so the holes on the bottom of the shelf engage the pegs.
Repeat for any additional shelves.
Install the Handles
NOTE: To protect from damage, the door handles and drawer pulls are installed inside the cabinet or packaged
individually.
Remove door handles and drawer pulls that are attached to the inside of the cabinet.
Install the handles and pulls to the outside of the cabinet, using the pre-drilled holes.
Tighten the screws securely.
1384740-2-A
Peg
Shelf
6 Kohler Co.