Télécharger Imprimer la page

ASA 2240138 Mode D'emploi page 7

Le moteurs tubulaire électronique filaire ø45 plug & play pour les applications sur: volets roulants avec verrou de securite.

Publicité

2) Vérifier le bon sens de rotation du moteur / Check that the motor turns in the correct direction.
ON
Le moteur tubulaire LP&P prévoit la programmation AUTOMATIQUE du réglage des points
d'arrêt. Aucune programmation n'est donc demandée.
The setting of the LP&P tubular motor AUTOMATICALLY programs the stop points. As such, no
programming is required.
3) Les points de fin de
course sont mémorisés en
automatique au cours des 4
premières courses complètes
d'utilisation normale
AUTOLEARN
du moteur.
3) The limit switch activation
points are memorised automati-
cally during the first 4 full runs of
the motor in normal use.
Electronic technology
Ø45 NEW LP&P
INSTRUCTIONS À L'UTILISATION / INSTALLATION'S GUIDE
1) Avant d'installer le moteur,
vérifier que sur le bâti sont bien
prévus les verrouillages de sécurité
supérieurs et les butées inférieures.
1) Before installing the motor, be sure
that the upper safety blocks and lower
stoppers are present on the window.
OK
NO
OFF
7c
4c
OK
ON
7c
4c
7

Publicité

loading