Washing Programmes - Electrolux EWB 95205 W Notice D'utilisation

6 electrolux
• To change the timer delay period, you
must go through the "Stop" position
and reprogramme your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
"Start/Pause" pushbutton. After closing
the lid again, press the "Start/Pause"
pushbutton.
Start of the programme
Press the "Start/Pause"
start the cycle. The corresponding light will
come on green.
It is normal for the programme selector to re-
main stationary during the cycle. The light
corresponding to the current cycle is illumi-
nated.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
Interrupting a programme
Adding washing during the first 10 mi-
nutes
Press the "Start/Pause"
the corresponding light will flash green while
the appliance is paused. The lid can only be
Stand by : once the programme has fin-
ished after a few minutes the energy sav-
ing system is enabled with the pilot

WASHING PROGRAMMES

Programme / Type of washing
Cottons (cold - 90°) : White or colour,
e.g. normally soiled work clothes, bed linen,
table linen, body linen, towels.
Max. spin speed: 1000/900 rpm
Synthetics (cold - 60°) : Synthetic fab-
rics, body linen, coloured fabrics, non-iron
shirts, blouses.
Max. spin speed: 900 rpm
Delicates (cold - 40°) : For all delicate
materials, for example curtains.
Max. spin speed: 700 rpm
Silk (cold - 30°) : For machine washable
silk and mixed synthetic items.
Max. spin speed: 700 rpm
pushbutton to
pushbutton :
Load
5,5 kg
1)
2,5 kg
2,5 kg
2,5 kg
opened around 2 minutes after the washing
machine has come to a stop. Press the
"Start/Pause" pushbutton again to con-
tinue the programme.
Modifying the programme in progress
Before making any changes to the current
programme, you need to pause the wash-
ing machine by pressing the "Start/Pause"
pushbutton. If the modification is not pos-
sible, the "Start/Pause"
es red for a few seconds. If you still decide
to change the programme, you must cancel
the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn
the programme selector to the "Stop" posi-
tion .
End of the programme
The washing machine stops automatically,
the "Start/Pause"
and the light "End of cycle"
The lid can only be opened around 2 mi-
nutes after the washing machine has come
to a stop. Turn the programme selector to
the "Stop" position
Unplug and close water inlet tap.
lights switched on. By pressing any but-
ton the appliance will come out of the
energy saving status.
Possible options
Rinse hold, Night cycle, Prewash, Dai-
ly, Super quick, Extra rinse, Delay start
Rinse hold, Night cycle, Prewash, Dai-
ly, Super quick, Extra rinse, Delay start
Rinse hold, Night cycle, Prewash, Dai-
ly, Super quick, Extra rinse, Delay start
Rinse hold, Night cycle, Delay start
pushbutton flash-
pushbutton goes out
comes on.
. Remove washing.