CFM TF140-DC Notice D'installation & Maintenance page 5

STEP 3. INSTALL BLOwER ASSEMBLY
Install the blower assembly in the housing and secure it with screws (Figure 3).
STEP 4. CONNECT DUCT
Using the recommended duct size, connect duct to the damper/duct connector (Figure 4), and
run duct to an exterior roof or wall cap using the shortest, straightest duct routing possible.
Ensure all duct connections are airtight.
STEP 5. CONNECT wIRING
Refer to wiring diagrams on page 6. Reattach all electrical box covers before applying power.
STEP 6. INSTALL GRILLE
Pinch the springs on the sides of grille and insert them into the slots in the housing. Firmly push
the grille against the ceiling (Figure 5).
Hole
FAN INSTALLATION
Hole
Hole
Figure 4
5
Figure 3
Figure 5