BEST Range Hoods ICF6 Mode D'emploi page 13

NON-DUCTED INSTALLATION ONLY
Note: Rooms with 10 or 11 foot ceilings
require flue extension model
AEICF6SB, available from your local
dealer. Discard the upper flue supplied
with the range hood and replace it with
the longer flue extension.
1. Insert the plenum in to the upper support
frame (Fig.16).
2. Attach the plenum to the upper support
frame using (2) 3.9 x 6mm flat head
screws provided, as shown in Fig.17.
3. Attach the 6"-to-8" adapter to the blower
outlet and attach 6"ducting connector to
the plenum (Fig.18).
4. Attach expandable duct to the plenum
through the duct connector (Fig.18).
5. Attach the upper flue to the upper support
frame by the mounting screws M4x8mm
(Fig.12).
MOUNTING
SCREWS
(3,9x6mm)
DUCT
CONNECTOR
- 13 -
FIG. 16
MOUNTING
SCREWS
(3,9x6mm)
FIG. 17
ADAPTER
FIG. 18