Install The Faucet - Kohler K-8761 Guide D'installation

Optional Escutcheon
Apply
plumbers
putty.
Center Hole
Spacer with
Gasket
Center Hole
1. Install the Escutcheon (Optional)
For 3-hole Installations
Installation to marble: Do not use plumbers putty. Use the
self-adhesive gaskets provided. Remove the paper backing and
apply the gaskets (adhesive side down) over the outside holes.
Installation to all other material: Apply a bead of plumbers
putty or other sealant to the underside of the escutcheon
according to the manufacturer's instructions.
For All Installations
Set the spacer with gasket under the center hole of the escutcheon
with the gasket in position to make contact with the countertop.
Align the center hole of the escutcheon with the center hole of the
sink.

2. Install the Faucet

Fit the washer on the faucet escutcheon.
Position the faucet in the sink hole so that the side marked
"COLD" is on the right.
Secure the faucet with the washer and nut from the underside of
the sink.
Position the faucet, then securely tighten the nut.
Kohler Co.
Faucet
Washer
Sink
Faucet
Tubing
3
Faucet
Escutcheon
Sink
Washer
Nut
1015079-2-G