Schiller Grounds Care Classen PRO HSC18HD Manuel D'utilisation page 34

Fiche technique
ET 04848
PRO
SOD CUTTER
BELT DISENGAGEMENT
1. Remove belt cover for access.
2. Move blade engagement lever until idler is
about 1/8" to 1/4" away from the back plate Fig-
ure 6
3. Adjust stop bolt E to the lever with idle 1/8"to
1/4" from back plate. Figure 7
4. Reinstall belt cover.
REAR WHEEL LOCK OR SWIVEL
To allow rear wheel to swivel:
1. Pull pin F up and turn. Figure 8 & 9
To lock rear wheel:
1. Turn pin F.
2. Move wheel back and forth until pin drops back
into locking hole. Figure
FIGURE 9
PROTOUMAT - 35 route de Colmar, 67600 Sélestat
SIRET : 444 448 898 00015
ADJUSTMENTS
FIGURE 6
FIGURE 7
Tél. : 03 88 08 65 06
Fax : 03 88 08 67 39
FIGURE 8
7
contact@protoumat.fr
34
www.protoumat.fr