Prog. Mode - Rointe ecodesign OLYMPIA Manuel D'installation Et D'utilisation

•
The LINK DEVICE option generates a WiFi network to
connect your product.
When you select LINK DEVICE, the following screen will
appear where you will be given the name of the network
and the password.
For more information on the pairing process, see section
6.
Use the
to confirm.
•
The WIFI INFO option allows you to view information on
the network status.
When you select WIFI INFO, the following screen appears
where you can see the IP, NM and GW.
Use the
If you keep pressing the On/Off button, two more windows
will appear: "Check Firmware Update" (YES/NO) and "Wi-Fi
Status" (Enabled/Disabled).

5.5.4. PROG. MODE

To change the status of your product from MANUAL to PROGRAMMING or vice versa, make
a quick press of the
press of the button. To see all the options available for programming your radiator, select
the option PROG. MODE in the main menu. The screen will show the following options:
44
Link device
buttons to select this option and press
WiFi info
button to see more information.
button. If you want to start programming your product, make a long