Manual Mode; Automatic Mode - Rointe Elba electric digital 400 Manuel D'installation Et D'utilisation

00 01 02 03 04 05 06 07 08 09 10 11 AM

3.6.1. MANUAL mode

When MANUAL mode is selected the set temperature, MANUAL mode icon, COMFORT/ECO/AN-
TI-FROST icon and the time/day of the week will be displayed on the screen. The set temperature
and the hour will alternate every 5 seconds on the screen.
In MANUAL mode you can choose a set temperature and the corresponding COMFORT/ECO/AN-
TI-FROST icon will appear on the screen according to the ranges below:
To adjust the set temperature:
Use the buttons to either increase or decrease the temperature respectively. When you
choose a temperature in the table above, the corresponding icon will appear on the screen.
When the room temperature is lower than the set temperature on the display panel, the product will
display the symbol in the top right of the screen.

3.6.2 AUTOMATIC mode

When the AUTOMATIC mode is selected, this activates the programming already established in the
product. You can choose from one of the 4 pre-installed programmes within the Rointe product:
Auto 1
You can also modify these pre-installed programmes to suit your needs. Please check the following
pages for a step by step guide on how to activate or modify one of the pre-installed programmes.
12
COMFORT
ECO
ANTI-FROST
Auto 2
21 - 30 C
o
7.5 – 20.5 C
o
7 C
o
Auto 3 Auto 4