Mounting Diagram; Control Panel Description - Chauvet DJ FlareCon Air Guide De Référence Rapide

FlareCON™ Air QRG
AC Power
Mounting

Mounting Diagram

Control Panel
Description
Menu Map
Main Function
Manual Channel
Auto Channel
Input Mode
Information
FlareCON™ Air has an external auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz. It runs on 9 VDC, 500 mA.
Before mounting this product, read the
The FlareCON™ Air can be mounted in four different ways:
·
Hung from a pipe with a clamp using the threaded mounting holes
·
Placed on a surface using the rubber feet
·
Attached to a pipe or stand using the hook and loop fastener strap
·
Mounted to a surface using the keyhole mounting holes
Rubber Feet
Button
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
<AUTO>
Enables a search for available channels on the FlareCON™ Air
Programming Levels
<CH01–16>
<CH01–16>
<WIFI>
<DMX >
WIFI SSID
<Wi-Fi™ name>
WIFI Channel
<01–16>
Safety Notes.
Keyhole Mounting Holes
Hook And Loop
Fastener
Function
Manually selects a channel
Automatically selects an available channel
To set to Wi-Fi™ signal input
To set to DMX signal input
Displays the name of the current Wi-Fi™ network
Displays the number of the current channel
4
Threaded Mounting Holes
M10 and M12
Description
EN