Publicité
Les langues disponibles
Les langues disponibles
This symbol indicates that the
machine is in conformance with the
applicable European directive.
MANDATORY
WARNING
These signs give advice
concerning your safety
Instruction plate
MANUFACTURER
TYPE
TYPE
WEIGHT
MASSE UTILE
Kg
MAXI TOOL
Ø MAXI OUTIL.
mm
BORE
Ø ALESAGE
mm
SPEED
T/MN - RPM
SPECIAL INSTRUCTIONS
The disc cutter is designed to provide safe
and reliable service in operating conditions
corresponding with the instructions, but it
can present dangers for the user and risks
of damage, consequently regular on site
inspection is necessary to ensure :
• Perfect technical condition (use for
the purpose for which it is intended
and taking into account any risks, and
correction of any malfunction
detrimental to safety).
• Use of a diamond disc for water
lubricated cutting of marble, stone,
granite, brick and facings (porcelain,
glazed tiles, ceramics, etc). The use
of any other disc is forbidden
(abrasive, saw, etc).
• Competent staff (qualifications, age,
training)
who
understood the manual in detail before
starting
work:
mechanical or other problem should be
investigated by a qualified maintenance
engineer (electrician, maintenance
manager, approved dealer, etc . . .).
• That the warnings and instructions
marked on the machine are followed
(adequate personal protection, correct
use, general safety instructions, etc).
• That no modification, transformation
or addition is detrimental to safety and
that it is carried out without prior
authorization from the manufacturer.
• Respect of the maintenance intervals
and periodical checks recommended.
• That only genuine spare parts are
used for repairs.
1
Use
• Purpose : boring all construction
materials.
1" 1/4
• Tools :
354 mm Ø max drill
F
L
Ø
Must not be used for any purpose for
which it is not designed.
10
2
• Maximum usable travel: 450 mm.
INDICATION
• Machine dimensions (mm) L x W x H :
INFORMATION
- 500 x 420 x 900
INSTRUCTION
• Net weight : de 44 à 60 kg (depending on
the version)
PROHIBITION
• 1 rack and pinion spindle.
• Inclination 0 to 30°.
model
Stihl
N° SERIE
SERIAL
ANNEE DE
FABRICATION
Husqvarna
YEAR
FABRICATION
PUISSANCE
kW
POWER
Pneumatics
PLAGE DE
V
VOLTAGE
TENSION
FREQUENCE
Hz
FREQUENCY
3
INT. UTIL.
A
INTENSITY
• On delivery, check the state of the
machine.
• Always keep it clean.
• Check the supply cable and extension
regularly.
• Always take care while using the
machine.
• Check the assembly (unusual vibration),
and that the drills are correctly fitted.
1
2
3
4
5
6
7
have
read
and
8
any
electrical,
9
4
• Remove the diamond tipped drill from the
motor.
• Lower the carriage to the base and lock
the brake.
• To avoid damaging the motor shaft, the
borer must not be carried or moved by the
shaft, whether or not it is fitted with a drill
or extension.
• If the (optional) suction base is being used,
do not move the borer sideways (this might
damage or displace the base seal).
5
Technical specifications
power
pressure
level
level
Lwa(Db)
Lpa(Db)
EN 23744
EN 31201
118
106
117
104
101
83
Description of the machine
SEE FIG. 1
- Column
- Carriage
- Hand crank
- Body
- Diamond tipped drill
- Motor
- Motor mounting plate
- Water supply
- Retaining spikes
Handling - Transport
Inspection before starting up
Please read the instructions for
use prior to operating the
machine for the first time.
The working area must be
completely cleared, well lit and
all safety hazards removed (no
water or dangerous objects in
the vicinity).
The use of ear protection is
mandatory.
The operator must wear
protective clothing appro-
priate to the work he is
doing. We recommend
that this includes both
eye and ear protection.
Any persons not involved in the
work should leave the working area.
1" 1/4
Use drills which are
suitable for the work to be
F
undertaken (speed, form,
L
type of work, etc . . .).
Ø
- 2-stroke petrol engine (5% 2 stroke 100%
synthetic oil) 6.5 bhp and 4,1 bhp.
INSTALLATION / MOUNTING
6
Drilling pipes in the open : attach the
machine to the pipe using one or two
ratchet straps.
Pipe-laying in the bottom of a trench: Place
the machine on the soil at the bottom of the
trench and stick the two retaining spikes in
the ground.
Other methods may be used to ensure that
the machine is firmly anchored: place a block
on top of the column and press down with
the digger bucket / wedge against the walls
or support on the bottom of the trench, etc.
FITTING THE DIAMONDTIP /
7
PRÉPARATION
- Ensure that there is a bronze ring
between the machine shaft and the bore
connector to make it easier to remove the
bore.
- 4,1 bhp engine:
- Sélectionner sur la boîte de vitesse, la
bonne vitesse de rotation en fonction du
Ø du foret.
- Select the appropriate gear speed for the
bore diameter.
Position L •
Ø 150 - 350,
240 - 140 rpm
Position L • • Ø 50 - 150,
310 - 185 rpm
- 4,1 bhp engine:
Without gearbox
Regulate the engine speed in accordance
with the appropriate drill speed..
8
Starting
Always take care.
Before use, remove the spanners
and adjustment tools from the
base or the borer.
Get into a comfortable, balanced
position.
When boring walls, floors or
anywhere where there may be
buried conductors, DO NOT
TOUCH THE METALLIC PARTS
OF THE MACHINE.
Hold the machine by the plastic
handles which will avoid indirect
contact with live conductors
which might be drilled.
STARTING
- Turn the switch to Start.
- Pull out the choke (under the air filter).
- Open the throttle slightly using the throttle
lever.
- Pull the starting cord until the engine fires.
- Push in the choke and allow the engine to
warm up for a few minutes before use.
Publicité
