Set An Alarm; Firmware Upgrade - Lotus 50000 Manuel D'utilisation

Masquer les pouces Voir aussi pour 50000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

2.10 Set an alarm

Tap "+" to add an alarm. Set the alarm time
and Repeat settings if the alarm should occur
on a regular basis.
When enabled, alarms will make the watch
vibrate up to 20 times.
2.11 Heart rate test
This test allows automatic heart rate measure-
ment. Set the period from start to end and
sedentary time interval (minutes), Enable with
the Heart rate test switch.

2.12 Firmware upgrade

This function checks if new firmware version
is available for the watch. Prompt to update
and upgrade to the latest version when there
is a new one.
2.13 Disconnect
Your watch will be listed under My Device.
Tap the connected device name or swipe left
to disconnect.
Frequent Questions
*Do not expose this device to very hot or
cold conditions for a long time. Exposure can
cause permanent damage.
*Why can't I wear the watch when taking a
hot bath?
As bath water temperature can be is high,
steam will be generated which can penetrate
through the watch's water proofing.
*The watch can't start up or charge
If your newly received watch doesn't start up,
plug in the charging cable to activate the watch.
If your watch can't start up due to too little bat-
tery charge or the watch has not been used for
a long time, please plug in the USB cable and
charge for at least half an hour for activation.
Disclaimer
The method of capturing the heart rate through
an optical sensor used by this LOTUS watch
does not reach the level of precision and accu-
racy of a professional medical device, nor can it
guarantee the equivalent stable readings. The
watch cannot replace a medical device in its
function of detecting or diagnosing patholo-
gies, heart or other diseases.
Consequently, with respect to this function, the
device is for recreational use only. Multiple factors
(including level of skin contact, pigmentation,
tattoos, sudden arm movements etc) can alter
the accuracy of the data provided by the sensor.
Therefore, keep in mind that the actual heart rate
may be higher or lower than the reading indicat-
ed by the optical sensor at a given time.
If you suspect any anomaly, always consult your
doctor and in case of emergency, immediately
contact the emergency services in your area.
Festina Lotus SA assumes no responsibility
for any claim that may arise from the use and
/ or interpretation that the user of the device
and / or third parties may make of the heart
rate information provided by their devices.
WARRANTY
1. If quality problems appear caused by man-
ufacturing, materials or design faults within 2
years (since the day of purchase), we will offer
free warranty for. We will offer free warranty
for battery and adapter during a 6 month pe-
riod providing the watch is used correctly.
2. For faults caused by the user's personal
use, no free warranty exists, Examples include;
a). The unauthorized disassembly or refit of
the product.
b). The dropping or banging of the product.
c). Any abusive damage or misuse (such as:
exposing the watch to water, exaggerated
trauma , scratching or damaging of the pe-
ripheral components, etc.), all these are be-
yond the scope of the warranty.
3. When requesting a free warranty repair,
you must provide a warranty card with the
stamp of store where the product was pur-
chased and the purchase date.
4. If you experience problems during the set
up or use, please contact the store / the cus-
tomer service where the watch was purchased.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

500015000250003

Table des Matières