IVIGO EHR5012 Instructions De Montage Et Manuel D'utilisation page 14

2.2 Chromated Model
1. Open the packing box and take out the radiator with
its protective nylon cover. Tear the protective nylon
cover outside the box without giving any harm to the
appliance and take out the assembly unit.
2. Correct space has to be measured in order that the
connection cord can easily be connected to the electric
socket. After determination of the installation area, the
holes must be marked according to the method shown
in Figure 6.
3. After marking the points according to Figure 6, the
holes will be drilled by a Ø10 mm drill and the plastic
dowels (see figure 5 -part "1") that are in the installation
items are inserted to these holes.
4. Attach the anchors (4 pieces) (see figure 5 - part"2")
onto plastic dowels with the washer (see figure 5 -part
"3") and the screw (see figure 5 - part "4").
5. Then you will fix your towel warmer on the wall with
assembly parts 5, 6, 7, 8, 9, 10 as its shown in figure 6.
Note: Protect the control unit against impacts and
crashes during installation.
Ø6 x 150 mm
10