First Use - neopulse NP1 MICRO Notice D'utilisation

E N

FIRST USE

1
2
20
1. Charge the device before first use. Plug the USB charger into a wall
8H
outlet or into a device, which has a USB interface and place the power
cord in the charger plug (3) of the device, for approximately 8 hours for
the first use. The charge indicator of the USB charger changes from
red to blue during the charge and to fixed blue when the device is fully
charged. Do not use the device while it is in charge. Don't forget to
unplug it to use it.
Under normal conditions of use, a full charge provides approximately
1 week of operation. When the battery needs to be recharged (about
5% of remaining charge), the operating speed as well as the power
of the device drop. This tells the user that the device needs to be
recharged. A full charge takes between 4 and 6 hours.
If you use the dental water jet once a day and if you are several in the
family using it, it is recommended to charge it once a week.
2. Pipe / handle assembly: insert the handle base (5) into the hole
in the base unit, respecting the polarizing slots. Then lock a quarter
turn to the right.