Maintenance & Care - Adidas T-19 Mode D'emploi

MAINTENANCE & CARE
IF THE RUNNING BELT MOVES TO THE LEFT, TURN THE BOLTS ON
THE LEFT SIDE ¼ OF A TURN CLOCKWISE, THEN TURN THE RIGHT
BOLT ¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT
MOVE, REPEAT UNTIL IT CENTRES.
OVER TIME THE RUNNING BELT WILL LOOSEN. TO TIGHTEN
THE BELT TURN THE LEFT & RIGHT SIDE BOLTS ONE FULL TURN
CLOCKWISE, CHECK THE TENSION OF THE BELT. CONTINUE
PROCESS UNTIL BELT IS THE CORRECT TENSION. ENSURE TO
ADJUST BOTH SIDES EQUALLY TO CORRECT BELT ALIGNMENT
IF THE RUNNING BELT MOVES TO THE RIGHT, TURN THE BOLT ON
THE RIGHT SIDE ¼ TURN CLOCKWISE, THEN TURN THE LEFT BOLT
¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT MOVE,
REPEAT UNTIL IT CENTRES.
HTTPS://WWW.ADIDASHARDWARE. C OM/PRODUCT-SUPPORT
www.adidashardware. c om 13