Ailebebe KURUTTO 4S Consignes D'utilisation page 14

Checking after installation/placing your child
Verification after installation
If there is any point that is different from
the completed configuration, install the
child car seat again from the beginning.
■
Buckle side of the seatbelt on the vehicle
" The shoulder seatbelt is held by the
back side of the shoulder seatbelt
guard cover (between this child car
seat and the backrest of the vehicle).
# The shoulder seatbelt is clamped
by the belt stopper on the buckle
"
If the seatbelt is not passed through correctly,
the performance of the child car seat may be
compromised and it cannot be used safely.
#
Warning
A
properly. (Do not use the belt stopper
on the buckle on the opposite side.)
$ The tongues of seatbelt are inserted
in the buckle. (The belts of the
buckle are not loose.)
% The waist harnesses are passed
through the waist harness guides
properly.
& The seatbelt of the vehicle is not
loosened or twisted.
$
11 (EN)
&
%