Packing List; Status Lights - Energy Power Bar Elite CS-30 Manuel Du Propriétaire

thank yoU
Thank you for your purchase of the Energy Power
in audio research and development as well as in the engineering and manufacturing
of high-quality speakers since 1973. Your new Energy Power Bar Elite is a compact,
stylish, easy to connect and use enhancement for TV, movie and even personal audio
sound. Unlike many competing designs, the Energy Power Bar Elite uses a 2-way speaker
configuration with a separate tweeter and midbass driver for both the left and right chan-
nels and combines that with their exclusive Convergent Source Module technology for the
most detailed sound and the highest vocal clarity available in its price range. A wireless
subwoofer that receives its signal from the soundbar adds realistic bass for a complete
sound experience in a small, unobtrusive package! The Energy Power Bar Elite is a 2.4
GHz product designed to wirelessly transmit a signal from the soundbar to the subwoofer
up to a 50 foot (15m) radius.

PaCkInG LISt

1. SOUNDBAR
2. WIRELESS SUBWOOFER
3. SOUNDBAR POWER SUPPLY/POWER CORD
4. SUBWOOFER POWER CORD
5. ONE 5.9 FOOT (1.8M) DIGITAL OPTICAL CABLE
6. ONE DUAL RCA CABLE
SUBWOOFER
VOLUME
7. TWO RUBBER FEET
8. ONE REMOTE CONTROL
MIN MAX
9. QUICK SETUP GUIDE
10. SOUNDBAR WALL-MOUNT TEMPLATE
11. THIS OWNER'S MANUAL
SoUnDBar front

StatUS LIGhtS

POWER
SoUrCE
AC~100-240V
ON OFF
50/60Hz
90W
mUtE
VoLUmE UP
VoLUmE DoWn
SoUnDBar rEar
analog rCa Inputs
1 SOURCE
R
L
Digital optical
Cable Input
Bar Elite! Energy has been a leader
™
SoUnDBar StatUS LIGht
rED: In STANDBY ("Sleep") Mode
GrEEn: On Digital Optical Cable Input
oranGE: On Analog RCA L/R Input
oranGE (flashing): RCA Input muted
GrEEn (flashing): Digital Input muted
rED (flashing): Failure to learn a remote
control command
GrEEn or oranGE fLaShES: A remote
control signal has been received
WhItE (right Status Light):
In 3D Surround Mode
Power Supply Input
2
DC IN
24V – 2.5A
65W
OFF
main Power
SUBWoofEr rEar
SUBWOOFER
VOLUME
MIN
POWER
ON
SUBWoofEr StatUS LIGht
BLUE (Solid): Receiving wireless signal from soundbar
rED (Solid): Searching for soundbar wireless signal
PLaCEmEnt/InStaLLatIon
1. Placing/wall-mounting the soundbar: The soundbar is designed to be placed on a
flat surface directly in front of your TV on its two supplied feet, on a shelf directly
above or below your TV in a piece of furniture with feet or wall-mounted (via
keyholes on the rear of the soundbar) under a TV that is also wall-mounted. If wall-
mounting, connect supplied cable (or other cable) to TV first, then use supplied
wall-mount template to mount soundbar. If the two mounting holes drill into wall
studs, screw two wood screws in those holes to hang the soundbar on. If there are
no wall studs where the holes are drilled, use wall anchors that support at least 7
pounds to hang the soundbar on. Connect cable from TV (see Connection section) to
soundbar and hang soundbar on wall.
2. Placing the subwoofer: The subwoofer is designed to be placed on the floor in the
same room within 50 feet of the soundbar near an electrical outlet. For maximum
bass output, place the subwoofer in a corner on the same wall as the TV and
soundbar. Once the soundbar has been connected to the TV and plugged into a wall
outlet, plug the subwoofer into a wall outlet.
POWER
ON
MAX
AC~100-240V
OFF
50/60Hz
90W
1 SOURCE 2
DC IN
R
24V – 2.5A
65W
L
tV
Volume Control
Status Light
main Power on/off
Power Cord Input
POWER
OFF ON
tV