Bluetooth ® Set Up - LEXIBOOK BT600 Serie Mode D'emploi

Microphone
With your Mini Bluetooth® Tower you can sing the songs by connecting a
microphone (not included) to the unit under Aux in, Bluetooth®, USB or SD/MMC
mode.
1. Insert the end of your microphone cable to the microphone in jack on the back
of the mini tower.
2. Push the on/off interrupter to "ON" position to turn the unit on.
3. Then press Mode button repeatedly until selecting the desired mode.
4. Adjust the volume level of the microphone with the microphone volume control
knob located on the back panel.
Note: The microphone has to be a 3.5mm condenser microphone.
Do not bring the microphone too close to the speakers as it may cause audio
feedback (squealing noise) through the speakers.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Lexibook® is under license.
Other trademarks and trade names are those of their respective owners.
© 2017 Bluetooth SIG, Inc.
Your audio player must support the A2DP Bluetooth® profile to match this
Sound Tower. Please refer to your audio player's instruction manual for accurate
information about the Bluetooth® profiles it supports, and how to set up Bluetooth®
pairing.
Initial Pairing
1. Turn the unit on, then press Mode button and select Bluetooth® mode. The blue
indicator of the Bluetooth® mode will flash to indicate that Bluetooth® mode is
effective.
2. Activate the Bluetooth® function on your personal device and make sure it is in
discoverable mode.
3. Confirm pairing or select the Bluetooth® name "BT600" to connect your player
to the speaker.
4. If pairing is successful, the Bluetooth® light will stop flashing and glow steadily.
You can play an audio or a video file. Adjust the sound volume level using the
keys on your personal device or the volume buttons of the tower.
5. To stop the connection with the speaker, press another mode on the top panel
or a button on your audio player. Once the connection has been stopped, the
LED indicator will flash.
Note: Some music players do not fully support Bluetooth® audio controls. Play/
pause, previous and next buttons on the Bluetooth® speaker may not respond.
The music player may also turn off. To get the best control experience in the said
player, use the on-screen track controls of your music player rather than those on
the speaker.
BT600seriesIM1167_101_V34.indd 16
®
BLUETOOTH SET UP
16
18/4/17 11:03 am