LEXIBOOK BT600 Serie Mode D'emploi page 15

Mini tour bluetooth
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
USB port
1. Power on the unit and insert a USB Flash Drive (not included) into the USB port,
ensuring the plug is fully inserted in the correct way. Once inserted the USB
indicator light will glow steadily.
2. The tower will automatically start playing music from the USB.
3. Press on Previous and Next buttons to select the desired music.
4. Press Play/Pause button to play or pause the music. While pausing, the
indicator light will flash.
5. To stop the playback, press the Mode button or remove your USB Flash drive
from the micro USB port.
SD/MMC card slot for playback
1. Power on the unit and insert a SD/MMC card (not supplied) into the SD/MMC
card slot, ensuring the plug is correctly inserted. Once inserted the SD/MMC
indicator light will glow steadily.
2. The tower will automatically start playing music from the SD/MMC card.
3. Press Previous and Next buttons to select the desired music.
4. Press Play/Pause button to play or pause the music. While pausing, the
indicator light will flash.
5. To stop the playback, press the Mode button or remove your SD/MMC card from
the SD/MMC card slot.
Note: When USB and SD card inserted at the same time, the last one inserted will
be played in priority. To toggle from USB to SD card and vice versa, press MODE
button and select the USB or SD/MMC mode. Once selected, the corresponding
LED indicator on the top panel will light up.
Aux in
You can also enjoy the music from the Sound Tower with the AUX in jack when
connected to an external audio player.
1. Turn the unit on, then press Mode button repeatedly until selecting the AUX in
mode. Once selected, the AUX in indicator will light up.
2. Insert one end of the AUX in cable (included) into your audio device and the
other end into the AUX in jack at the rear of your speaker system.
3. Press and hold Volume up and down buttons to adjust the volume of the speaker
or control the volume functions from your audio player.
4. To stop the playback, press the Mode button or remove the AUX in cable from
the AUX in jack.
Note: When the speaker is in AUX IN mode, the PLAY/PAUSE, PREVIOUS and
NEXT buttons on the speaker are disabled. Please use the control buttons on your
music player to get the best control experience of the music.
BT600seriesIM1167_101_V34.indd 15
15
18/4/17 11:03 am

Publicité

Table des Matières
loading

Table des Matières