Subaru L101SAJ001 Instructions D'installation page 2

INSTALLATION INSTRUCTIONS
REMOVE TAIL LIGHTS
1. REMOVE TAIL LIGHT COVER (LEFT AND RIGHT SIDE)
NOTE: BEFORE BEGINNING THE
VEHICLE MUST BE AT ROOM
TEMPERATURE. IF TEMPERATURE IS
BELOW 60 F, LET VEHICLE SIT INDOORS
UNTIL THE BUMPER IS AT ROOM
TEMPERATURE.
2. REMOVE TAIL LIGHT ASSEMBLY (LEFT AND RIGHT SIDE)
3. USING 10MM SOCKET, REMOVE
2 BOLTS AS SHOWN (2 EA. SIDE)
REMOVE TAIL LIGHT BY
PULLING STRAIGHT BACK
4. REMOVE TAIL LIGHT BULBS AND HOUSING (LEFT AND RIGHT SIDE)
5. SAFELY SET ASIDE ALL PARTS
TO AVOID DAMAGE DURING
BUMPER REMOVAL.
RETAIN FOR RE-INSTALLATION.
PART NUMBER
L101SAJ001
PRINTED IN MEXICO
REMOVE
COVER
ISSUE DATE
01 03/25/13
PART NUMBER L101SAJ001
DESCRIPTION: SUBARU OUTBACK
REMOVE 2 BOLTS
SUBARU OF AMERICA
REMOVE 2
SCREW CLIPS
REMOVE 3 BULBS FROM
TAIL LIGHT AND SECURE.
PAGE
2 OF 9
38014N REV G