LUND Rhino Linings Rocker Guards Instructions De Montage

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Important Installation Notes
• A trial fit is recommended to ensure proper positioning and fit.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
• Thoroughly clean the attachment surfaces with isopropyl alcohol (rubbing alcohol). Wipe completely dry.
• Ideal application temperature range is 70°F to 100°F (21°C to 38°C).
• Apply even pressure across the Rocker Guard surface to ensure proper adhesion.
• Avoid car washes and other wet conditions for 72 hours for best adhesion.
Panel Locations
1
Installation Instructions
Rhino Linings
Isopropyl Alcohol
Remove liner and apply Rocker Guards as follows:
1 2
2
NOTE: Repeat for opposite side of vehicle
Rocker Guards
®
Panel Guard Components
Clean Towel
3
3
Page 1 of 4
I - Sheet Number LUNDRL03 Rev.A
4
4
5821436
5
5