Zephyr Roma Groove ZRG-E30BS Guide D'utilisation, D'entretien Et D'installation page 19

ZEPHYRONLINE.COM
ICON Touch Controls
3 LIGHTS BUTTON
- Lights have two levels, Low and High.
- From o , press one time for Low. Press again for High. Press again to power lights
o .
4 DISPLAY INDICATORS
Ba e Filter Clean Reminder (always enabled)
- After 30 hours of fan usage, the
indicating it is time to clean the ba e filters.
- To reset: With hood o : hold the
will blink two times confirming the 30 hour timer has been reset.
Charcoal Filter Replace Indicator (disabled by default, must be enabled if
recirculating hood)
- To enable Charcoal Filter Replacement Reminder:
- With hood o , hold
All LED indicators will illuminate for three seconds confirming the Charcoal
Filter Replace Reminder is enabled.
- To disable Charcoal Filter Replacement Reminder:
- With hood o , hold
All LED indicators will blink two times confirming the Charcoal Filter Replace
Reminder is disabled.
- After 120 hours of fan usage the
charcoal filters need replacment.
- To reset: With hood o , hold the
blink two times confirming the 120 hour timer has been reset.
Roma Groove Use, Care, and Installation Guide
Features & Controls
button indicator will begin to slowly blink
button for three seconds. All LED indicators
button and button simultaneously for two seconds.
button and button simultaneously for two seconds.
button will slowly blink indicating the
button for two seconds. All LED indicators will
19