Certificate Of Guarantee - Ridea 101. FLOWER POWER Notice De Montage

supports by sliding them along the slots after removing the disc cover and
loosening the plugs. Once the ideal adjustment has been found, tighten the
screws in the plugs all the way.
3.4 Fasten the cylinder with tapered seat (fig. 3) to the wall by means of suitable
plugs. The plugs must be suitable to type of wall and sturdy enough to carry the
weight of the radiator. The radiators are supplied as standard with 8mm diameter
plugs for reinforced concrete. Follow the dimensional indications provided in the
table and the drawing in fig. 1. It is advisable to mark the fastening point on the
wall by closing the radiator against the wall.
3.5 Fit the hoses supplied as standard, first to the radiator manifold by screwing
the male connector terminal, and then to the wall-mounted valves by rotating the
female connectors.
3.6 Having completed the hydraulic connections, close the radiator against the
wall in "door-like" fashion, and secure the pin to the closing cylinder with the Allen
screw already mounted in the cylinder as shown in fig. 4.
At the end, test the plant in order to verify the tightness of the manifolds.
N.B. Bleed the radiator by means of the air valve fitted to the upper part of the
radiator before use.

4. CERTIFICATE OF GUARANTEE

This certificate guarantees the originality of RIDEA design, developed and
constructed expressly for you in a limited series, by combining craftsmanship and
innovative technologies, and by making use of the finest and most exclusive
materials and finishes.
At the end of the production process the radiator undergoes stringent quality
controls.
Ridea furthermore certifies that this product has been conceived, designed and
manufactured in Italy. Small imperfections are not defects but qualities attesting
hand-made construction.
Ridea guarantees the use of ecological paints.
Thank you for choosing a Ridea product.