Chronos Manufactures ANDRE BELFORT AB-8610 Empereur Mode D'emploi page 9

EN
Wind up the watch until the second hand starts to run by turning the
crown between 30 and 40 times. Pull the crown carefully to position
2. Set the watch to 7 o'clock by turning the crown counter-clockwise.
Push the crown carefully to position 1 and set the date by turning
the crown counter-clockwise. Pull the crown carefully to position 2
again and set the current time by turning the crown counter-clock-
wise. When finished push the crown carefully back in to place. For
months with less than 31 days, the date must be changed manually
at the end of the month.
Important! Never set the date between 8 pm and 4 am. The date
changing mechanism is active in this period and any exterior
intervention can damage the movement. When the warranty of
your watch expires, we recommend you to send it in for a revi-
sion to ensure its longevity. A revision should optimally be con-
ducted once a year to counteract general wearout and to main-
tain the water-resistance of your watch.