Oceanic OCEAISHGB1000W2 Guide D'utilisation page 39

⬧
To finish the setting and go back to the previous setting interface: press
last hour.
Remark:
After you finish program mode setting, it will be saved but will not automatically start working at
program mode. You need to press OK to choose program mode to make the heater work at this
mode.
4. Temperature setting
⚫ Temperature setting is available under Comfort mode
P. Temperature setting is not available under Anti-freeze mode
⚫ To select the desired set temperature: press
⚫ Temperature range for Comfort mode and Pilot wire mode: 5°C - 29°C.
⚫ Temperature range for ECO mode: 1.5°C - 25.5°C, 3.5°C less than Comfort mode.
⚫ Temperature setting will be saved automatically after 5 seconds without action.
Remark: When the room temperature is higher than the selected temperature, the heater will
stop heating.
5. Window detector function
Hour
(01 is for hour 1 to
hour 2, and so on,
24 is for hour 24 to
or , each click is 0.5°C.
Page 37 of 44
/
/ ECO mode / Pilot wire mode
.
, or OK at the