Oceanic OCEAISHGB1000W2 Guide D'utilisation page 36

⚫ To set the minute when
⚫ To confirm the minute and move to set the day of the week: press OK
⚫ To set the day of the week when
⚫ To complete the time setting: press OK or wait 30 seconds without action, the appliance will
return to Standby mode.
2. Mode selection (
/
⚫ Press
Icon Function
Comfort mode
ECO mode
Anti-freeze mode
Program modes
Pilot wire mode
⚫
Program modes and
When the device is working on Program mode, press and hold OK button for 3 seconds, it will
shift from Program mode to Pilot wire mode. When the device is working on Pilot wire mode,
press and hold OK button for 3 seconds, it will shift from Pilot wire mode to Program mode.
The interface of program mode and Pilot wire mode are as below:
Program mode
⚫ Under Pilot wire mode, choose the mode via the external control (for France only). For other
is flashing: press
/
button)
to toggle among the modes:
Pilot wire mode
share the same icon
Press
seconds to shift.
/
is flashing: press
Explanation
Set the temperature you desire between
5°C - 29°C.
3.5°C lower than Comfort mode.
The appliance maintains the temperature
around 7°C.
please refer to part 3 "Program mode
P1-P7 weekly
setting" to learn how to set this mode)
(
The device can be controlled by the
external programmer. Function will be
displayed accordingly.
See below Table 1
OK for 3
Page 34 of 44
to adjust it among 00-59
/
to adjust it among 1-7
personalized
.
And these 2 modes are mutually exclusive.
Pilot wire mode
program