Connecting To A Tv; Connecting The Tv That Supports Hdmi Arc (Audio Return Channel) - Samsung HW-S800B Manuel

05 CONNECTING TO A TV

Connecting the TV that supports HDMI ARC (Audio Return Channel)

CAUTION
• When using an HDMI to MINI HDMI cable, take caution not to break the cable terminal.
• When the HDMI cable is connected, the HDMI signal is received first.
• To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals marked ARC. Otherwise, the TV sound may not
be output.
• The recommended cable is High Speed HDMI Cable with Ethernet.
1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the figure.
2. Turn on the Soundbar and TV.
3. Your TV will output sound via the Soundbar.
• When the TV sound is not output, press the
control to select the "TV ARC" mode.
• When the sound is not output, check the HDMI cable connection again.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTE
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 0.55 inches
(14 mm).
• This function is not available if the HDMI cable does not support ARC.
• When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on your TV is set to PCM, we recommend that
you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may
use different words for Dolby Digital and PCM depending on the TV manufacturer.)
Connect to the HDMI IN (ARC)
or (eARC) port of your TV.
HDMI IN
(ARC)
LED indicator
(Multi Function) button at the top of the Soundbar or the
Connect to the HDMI (ARC)
port of the Soundbar main
HDMI to MINI
HDMI Cable
Top of the Soundbar
White On → Off
"TV ARC"
ENG - 17
unit.
SERVICE
HDMI
(ARC)
Rear of the Soundbar
(Source) button on the remote