Components; Assembly - Ener-G+ HEA 21531 Manuel De L'utilisateur

I N F R A R E D g A z E b O H E A T E R

1. cOMPONENTS

Wireless remote contole x1
AA batteries x2
1. Make sure that all the parts are present and that there are no missing parts. Please
empty the carton thoroughly to make sure after unpacking the unit from the box.
2. Do not PLUG tHe UnIt In UntIL tHe UnIt IS CoMPLeteLY ASSeMBLeD AnD
tHeRe IS no DAMAGe to the unit and power cord.
IF tHeRe IS AnY DAMAGe oR MISSInG PARtS, PLeASe ContACt eneRG+
CUStoMeR SeRVICe At 866-967-7333. (See WARRAntY SeCtIon)

2. ASSEMbLy

MAKe SURe tHe HeAteR DoeS not WoRK PRIoR to HAnGInG It on A WALL oR A
SoLID SURFACe.
1. Make sure the adjustable support 'A' is screwed to the support 'b' of the heater with
the 4 screws M6 50mm provided.
2. Attach the adjustable support 'A' on a solid surface (brick, concrete or other nonflam-
mable material). Tighten it using the supplied4 screws (Fig. 1 and 2)
P A g E 4 EnErg+
Support bracket 'A' x1 Support bracket 'b' x1