Philips HP6511 Mode D'emploi page 14

EnglisH
1
Problem
The appliance
does not
work.
Possible cause
The epilating head
did not touch the
skin.
The sensitive area
cap was on the
appliance when you
epilated your legs.
You moistened
your skin with
water or a cream
or other skincare
product prior to
epilation.
You moved the
appliance over the
skin too fast.
The batteries are
empty.
The socket to
which the appliance
is connected is not
live.
The appliance is
not switched on.
You did not attach
the epilating
head correctly.
Solution
Make sure the epilating head
and the massaging element are
in proper contact with your skin
during epilation.
Only use the sensitive area cap
to epilate your underarms and
bikini line.
Make sure your skin is entirely
dry and free from grease. Do
not put any cream, body milk or
other skincare product on your
skin before you start to epilate.
Move the appliance over the
skin at moderate speed.
Charge the batteries.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may
need to switch on the light to
activate the socket.
Switch on the appliance.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').