Installation - Napoleon HomeShield UVLFS036WB Instructions D'installation Et D'opération

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6

4.0 INSTALLATION

IOM
EN
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED SERVICE
PERSONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND OPERATION OF THIS
UV APPLIANCE. READ THESE INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING
INSTALLATION OR OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN IMPROPER INSTALLATION, ADJUSTMENT, SERVICE OR MAINTENANCE,
POSSIBLY RESULTING IN FIRE, ELECTRICAL SHOCK, PROPERTY DAMAGE,
UV HAZARD. ALWAYS PROTECT EYES AND EXPOSED SKIN FROM ULTRAVIOLET LIGHT.
UNPLUG OR DISCONNECT POWER BEFORE RE-LAMPING OR SERVICING.
REDUCED PERFORMANCE OF LAMP MAY RESULT. CLEAN AFTER HANDLING.
In the event of accidental breakage or replacement of the ultraviolet lamp, please ensure that the lamp is disposed
of in accordance with local and state environmental laws regarding fl uorescent lamps containing mercury.
NOTE
All wiring inside of the duct or air handling system in direct line of site of the UV lamp must be shielded
with aluminum foil tape or equivalent non-combustible material. When installing this unit, select a mounting
location that prevents ultraviolet light exposure to plastic fl exible duct liner or other plastic components with
unknown resistance to ultraviolet light. Ultraviolet light may cause color shift or structural degradation of
plastic HVAC components.
W415-1309 / B / 11.16.16
!
PERSONAL INJURY OR DEATH.
!
NEVER LOOK AT UV LAMPS IN OPERATION,
SEVERE EYE DAMAGE OR TEMPORARY BLINDING MAY OCCUR.
!
DO NOT OPERATE OUTSIDE OF AIR HANDLER.
MOUNT LAMP BASE TO DUCT FIRST.
!
NO OPENINGS IN DUCT ARE ALLOWED
WHICH WOULD GIVE DIRECT LINE-OF-SIGHT TO THE UV LIGHT.
!
DO NOT TOUCH LAMP GLASS WITHOUT GLOVES.
WARNING
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
H3.86
H3.82
H3.83
H3.84
H3.85

Publicité

Table des Matières
loading

Table des Matières