Introduction; Low Output; High Output - Napoleon HomeShield UVLFS036WB Instructions D'installation Et D'opération

4

2.0 INTRODUCTION

IOM
EN
How the HomeShield UV Purifi cation System works:
HomeShield UV Modules are designed to operate anytime the furnace has a call for blower circulation – heating,
cooling or continuous fan. Bulbs are coated to prevent OZONE creation. Low output units are for static surface
treatment while high output units will treat air and surfaces.
Multi Head Operation can be utilized to sterilize the air stream with 240 Watts of UV.
2.1

LOW OUTPUT

The low output unit works primarily to irradiate the evaporator coil of mould spores and bacterial growth. A wet
coil surrounded by warm air provides an ideal environment for mould spores and bacterial growth. A low output
36W UV module with ample coil exposure time will provide enough ultraviolet light energy to effectively render
the microbes ineffective and unable to multiply. This will prevent the evaporator coil from becoming blocked which
will help to maintain the effi ciency of the A/C unit and will increase the service life of the furnace and A/C system.
2.2

HIGH OUTPUT

The high output module at 120W can effectively reduce the microbes ability to reproduce and multiply within a
moving air stream. Exposure time is very important in this system. All household microbes require varying amounts
of UVC exposure to render them ineffective. This means that the slower the air passes by the system the greater
effect it will have. The high output system will also keep your evaporator coil free of bacterial growth which will
help to maintain the effi ciency of the A/C unit and will increase the service life of the furnace and A/C system.
W415-1309 / B / 11.16.16