Ice Production - Sub-Zero PRO Serie Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour PRO Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
Troubleshooting

ICE PRODUCTION

No ice.
Verify
or
appears in the freezer external display.
Verify the ice maker has been on for at least 24 hours.
Verify the freezer temperature is near 0°F.
Verify the ice container is properly installed.
Verify the ice maker arm in the down position.
Verify water is being supplied to the unit.
Verify the water filter has been replaced within the last
12 months and installed properly.
Verify the water filter has been removed if a reverse
osmosis filtration system is being used.
Blue or green ice.
Possible copper supply line corrosion. Contact a
plumber to clean or replace.
Black flecks in the cubes.
Stop use and contact Sub-Zero Factory Certified
Service.
Bad taste.
Defrost the freezer and clean with soap and water.
Place coffee grounds or charcoal briquettes in the
freezer to absorb odor.
Hollow cubes.
Clean the condenser. Contact Sub-Zero Factory
Certified Service if unresolved.
ODOR
The unit should be cleaned before using for the first
time. This will clear any odors that may have been
trapped during shipping.
Replace the air purification cartridge.
Clean the unit and shelving thoroughly.
Uncovered food could create an odor, which may
require cleaning.
Remove and clean the drain pan located behind the
kickplate, and reinstall.
subzero.com | 17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pro4850g

Table des Matières