Water Filtration System - Sub-Zero PRO Serie Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour PRO Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation

Water Filtration System

The water filtration system supplies filtered water to the ice
maker.
IMPORTANT NOTE: Discard the first two full containers of
ice after each filter replacement.
If the water filtration system will not be used, it can be
bypassed by removing the water filter.
The filter is rated for 750 gallons
whichever comes first. "Change Water Filter" will appear on
the display when the cartridge needs to be replaced. Touch
"Snooze" to delay the reminder for 24 hours or until the
cartridge can be replaced. Touch "Refresh" to reset the life
indicator to 100% once the filter is replaced.
Replacement Sub-Zero water filters can be ordered online
at subzero.com/store. For questions, contact Sub-Zero
Customer Care at 800-222-7820.
12 | Sub-Zero Customer Care 800.222.7820
or one year,
(2839 L)
WATER FILTER REPLACEMENT
1
To access the water filter, rotate the bottom of the grille
upward.
2
To remove the old filter, rotate counterclockwise
one-quarter turn, then pull out. Refer to the illustration
below. It is normal for a small amount of water to drip
when the filter is removed. It should be wiped up with a
paper towel or cloth.
3
Remove the new filter from packaging and remove the
plastic cap.
Insert the new filter into the manifold, and turn it clock-
4
wise.
Once the new filter has been installed, the water filter
5
life monitor will automatically reset.
WATER FILTER
Water filter removal

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pro4850g

Table des Matières