Unpacking The Device; Power Sources - LEXIBOOK BT1000 Serie Mode D'emploi

Masquer les pouces Voir aussi pour BT1000 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
When unpacking, ensure that the following elements are included:
®
1 x Bluetooth
Sound Tower
1 x Remote control (CR2025 lithium type battery already inside)
1 x AC/DC adaptor
1 x Instruction manual
1 x 3.5mm Line In cable
1 x Twin male RCA cable
1 x Docking station for tablet or smartphone
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and
tags are not part of this product and should be discarded.
®
The Bluetooth
Sound Tower operates on AC~100-240V, 50/60Hz.
AC operation
1. Check that the unit is switched off.
2. Insert the small end of the AC adapter into the DC IN socket at the back of
the unit.
3. Plug the other end of the AC adapter into any convenient AC~100-240V,
50/60Hz power outlet.
NOTE:
• Only use the adapter supplied with the product. Do not use other adapter.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
unplug the AC adapter from the mains socket and plug it back in.

UNPACKING THE DEVICE

POWER SOURCES

AC Outlet
AC/DC adapter
18

Publicité

Table des Matières
loading

Table des Matières