brondell SWASH BL67 Serie Mode D'emploi page 7

SAFETY INFORMATION
(IMPORTANT SAFEGUARDS)
OPTIONAL GROUNDING INSTRUCTIONS
This product is for use on a nominal 120V circuit, and has a grounding
plug that looks like the plug illustrated in sketch A in Figure 1.
A temporary adapter, which looks like the adapter illustrated in
sketches B and C, may be used to connect this plug to a 2-pole
receptacle as shown in sketch B if a properly grounded outlet is
not available.
The temporary adapter should be used only until a properly grounded
outlet (sketch A) can be installed by a qualified electrician.
Attach the grounding wire to the grounding screw on the product as
shown in sketch D of Figure 2. Attach the other end of the grounding
wire to the grounding screw located on the temporary outlet.
Do not connect the grounding wire to a
DANGER
non-grounded outlet.
SAVE THESE INSTRUCTIONS
A
B
D
C
Figure 1
Figure 2
5