Kohler K-2276 Guide D'installation page 7

"Kohler" Logo
Adhesive
Seal
Self-Rimming Installation
2. Install the Lavatory
Cut out the opening by carefully following the pencil line traced
from the template.
CAUTION: Risk of personal injury or product damage. This
lavatory is made of glass. Always use the same extreme care
appropriate for fine china when handling to avoid breakage.
Temporarily position the lavatory in the countertop cutout so the
"Kohler" logo is visible. The logo is on the inside basin, near the
rim, and should be positioned near the faucet.
Verify proper clearance between the lavatory, faucet, and
backsplash.
Remove the lavatory from the cutout, and return it to its
protective carton. Do not rest or store the lavatory on the drain
surface.
Drill the faucet holes.
Install the faucet to the countertop according to the
manufacturer's instructions.
NOTE: Apply a generous amount of clear silicone sealant when you
install the drain.
Install the drain to the lavatory according to the drain installation
instructions.
Kohler Co.
Adhesive
Seal
Above Counter Installation
7 1018897-2-A