JANE Baby Side Mode D'emploi page 14

Once the base frame is assembled t the upholstery by fastening the Velcro strips (4) found on the underneath
of the upholstery (4) to the base frame tube.
Place the mattress on the bottom of the mini cot.
Never use the mini cot without BABYSIDE mattress.
Lock all four wheels of the co-sleeping mini cot, lowering the levers to lock them so that the red mark is fully
visible on the wheels.
(*) IMPORTANT: For use as a Mini Cot-Cradle, check that the telescopic legs are ALWAYS unfolded and in the
most extended position (1)
The mini cot is now ready for use.
To dismantle the co-sleeping mini cot, follow the same steps in reverse.
UNFOLDING AND FOLDING THE LEG (CO-SLEEPING MODE)
Use your thumb to slide the cover back and keep the button pressed down, push the leg inwards with your other
hand to t it to the bed. When you release it or separate it from the bed, it will automatically return to its original
unfolded position where it will lock into place automatically.
1
"SLIDE"
*Note: For quicker installation, it is advisable to place the mini cot near the adult bed and then bring it closer
by tightening the straps.
VELCRO
2
"PRESS"
MATTRESS
STOP
STOP
Use as a Cradle
Uso como Moisés
(The most extended position)
(Posición más extendida)
Uso como Moisés
(Posición más extendida)
2
"PRESS"
14 14
1
1
1
1 "PRESS"
2
Co-sleeping mode
3