AirKing 9224 Mode D'emploi

READ CAREFULLY bEFORE ATTEMPTING TO ASSEMbLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIbED. PRO-
TECT YOURSELF AND OTHERS bY ObSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INjURY AND/OR PROPERTY DAMAGE!
DESCRIPTION
The Air King® 24" (60,96 cm) pivot/floor fan features 3-speed opera-
tion with a 3-paddle fan blade. The fan has an enclosed motor with
permanently lubricated ball bearings with a 10 ft (3,05 m) 18/3 cord
set, and is constructed of sturdy powder coated steel.
SPECIFICATIONS
Motor .................................120V , 50/60 Hz
Blade diameter ...................24" (60,96 cm)
Speeds ...............................3
Control ...............................Rotary Switch
Air flow distribution ...........190˚
Approvals ...........................ETL Listed. Close mesh fan guard
UNPACKING
When unpacking the unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing,
or damaged parts.
GENERAL SAFETY INFORMATION
1. Read all instructions before using Fan.
2. Make certain that the power source conforms to the electrical re-
quirements of the Fan.
3. Use this Fan only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electrical shock,
or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should not
be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH
AS THE SOLE MEANS OF DISCONNECTING POWER WHEN
INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE
POWER CORD.
6. This Fan must NOT be used in potentially dangerous locations
such as flammable, explosive, chemical-laden or wet atmospheres.
Rev. K 5/08
OPERATING INSTRUCTIONS & PARTS MANUAL
READ AND SAVE THESE INSTRUCTIONS
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
meets OSHA requirements.
24" FLOOR FAN
24" (60,96 cm) MODEL 9224
7. DO NOT use Fan in or near a window. Rain may create an electrical
hazard.
8. Completely assemble Fan, according to instructions, before con-
necting to power supply.
9. The power cord is equipped with a three-prong grounded plug that
must be inserted into a matching receptacle. Under no circumstances
should the ground prong be cut off the plug. Where a two-prong wall
receptacle is encountered, it must be replaced with a properly grounded
three-prong receptacle installed in accordance with the National Elec-
trical Code (NEC) and all applicable local codes and ordinances. This
work must be done by a qualified electrician, using copper wires only.
WA RNI NG: DO NOT USE A THREE-PRONG ADAPTER.
IMPROPER CONNECTION MAY CAUSE THIS RISK OF
ELECTRIC SHOCK. USE OF SUCH ADAPTERS IS NOT PERMIT-
TED IN CANADA.
WARNING: THIS PLUG IS A SAFETY FEATURE. TO REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INjURY,
DO NOT REMOVE, REPLACE, REPAIR OR TAMPER WITH
THE ORIGINALLY SUPPLIED PLUG. IF THE FAN DOES NOT
FUNCTION PROPERLY, IT MAY bE DUE TO THE SAFETY DEVICE
INCORPORATED IN THIS PLUG.
10. Where possible, avoid the use of extension cords. If they must be used,
minimize the risk of overheating by ensuring that they are UL listed.
Never use a single extension cord to operate more than one Fan.
11. Do not operate any Fan with a damaged cord or plug or after the Fan
malfunctions, has been dropped or damaged in any manner. Return Fan
to authorized service facility for examination, electrical or mechanical
adjustment or repair.
12. Do not insert or allow fingers or foreign objects to enter any ventilation
or exhaust opening as it may cause an electric shock or fire, or damage
the Fan. Do not block or tamper with the Fan in any manner while it is
in operation.
13. Always place the Fan on a stable, flat, level surface when operating, to
avoid the chance of the Fan overturning. Locate the Power Cord so
the Fan or other objects are not resting on it. Do not run Power Cord
under carpeting. Do not cover Power Cord with throw rugs, runners,
or the like. Arrange Power Cord away from room traffic and where it
will not be tripped over.
14.This Fan is not intended for use in wet or damp locations. Never locate
a Fan where it may fall into a bathtub or other water container.
15. Do not use Fan outdoors.
16. This Fan is not suitable for use in hazardous locations. Please refer to
National Electric Code (NEC) Article 500 or applicable state or local
codes or standards relating to electrical requirements for Hazardous
locations. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC
ARTICLE 500 (2008).
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
– DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICES.
SAVE THESE INSTRUCTIONS
1
5084028