Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Install hitch: Raise the hitch into position and slide the brackets above the exhaust pipe. Align bracket holes to the frame rail weldnuts and loosely install M12
bolts ① and conical washers ② to the hitch. Due to narrow space around passenger side frame rails, use 19 mm crowfoot wrench to secure the M12 bolts on
passenger side.
6. Tighten all M12 fasteners with torque wrench to 76 Ft. Lb. (103 N*M)
7. Reinstall the rubber hangers and exhaust muffler.
©2020 Horizon Global™ Corp. - Printed in Mexico
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 7 of 21
76428NP
10-23-20
Rev. A
Publicité
Table des Matières
