Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Insert the cartridge into the drive with a slow, steady motion.
• Do not drop or bang the cartridge. This can displace the tape leader, making the cartridge unusa-
ble and possibly damaging the drive.
• Keep tape cartridges out of direct sunlight and away from heaters and other heat sources.
• Place an identification label only in the slide-in slot on the front of the cartridge.
• Do not adhere labels to a cartridge anywhere except in the slide-in slot.
Tandberg DLT7000 Media Compatibility
STORAGE
70GB*
CAPACITY
Hardware Data
Yes
Compression
DLTtape™IV
Default Override Override Override
DLTtape™IIIXT
N/A
DLTtape™III
N/A
* Assuming 2:1 data compression – capacity may vary depending on native data.
Default =
The density that will be recorded on a blank tape cartridge without an override from either the application software or
from the Density select button.
Override = The lower density that may be selected to be recorded on the tape cartridge from BOT with an override from either the ap-
plication software or from the Density Select button.
NOTE:
The density may only be selected/overridden from BOT (Beginning Of Tape). On tape which already contains
pre-recorded data, the pre-recorded density will automatically be selected by the drive.
35GB
40GB*
20GB
No
Yes
No
N/A
N/A
N/A
N/A
N/A
N/A
30GB*
15GB
20GB*
Yes
No
Yes
N/A
N/A
N/A
Default Override
N/A
N/A
N/A
Default Override Override Override
10GB
6GB
2.6GB
No
No
No
N/A
N/A
N/A
N/A
N/A
N/A
Publicité
Table des Matières
