System Connection - Campbell Hausfeld PW1580 Instructions D'assemblage

580 Assembly Instructions and Parts List

System Connection

n
1. Insert lance into the gun and turn
clockwise to positive stop as shown in
a-
Figure 4.
el
s,
n-
Figure 4 - Gun/Lance Connection
a
2. Ensure that the power switch is in the
"OFF" position.
o,
3. Attach the high pressure hose and
gun assembly to the unit.
r
p-
n
ón
l
e
a
té
Garden
Hose
si-
la
Figure 5
All manuals and user guides at all-guides.com
OUTLET
13 mm Detergent
Bottle
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the power cord into a grounded
120V outlet, that is on a dedicated
circuit.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the "ON/OFF" switch to the
"ON" position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
On/Off
Gun
Switch
INLET
3
PW1580
High
Pressure
Hose
www.chpower.com