Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPTIONAL: Securing Locking Arm
CAUTION
• Be careful not to pinch fingers when adjusting
locking arm (B).
WOOD STUD: Adjust locking arm (B) until it aligns
4
to wood stud and secure using one #10 x 1-1/2"
security wood screw (R). If locking arm is difficult
to adjust, spin arm to loosen joint.
CONCRETE/CINDER BLOCK: Adjust locking arm
4
(B) to desired position, mark center of mounting
hole, and drill one 1/4" (6mm) dia. hole to a
minimum depth of 2". Insert alligator anchor (S)
into hole and secure locking arm (B) with one #10
x 1-1/2" security wood screw (R). If locking arm is
difficult to adjust, spin arm to loosen joint.
B
S
B
9 of 29
ISSUED: 04-01-11 SHEET #: 203-9029-4 02-27-14
All other brand and product names are trademarks or registered trademarks of their respective owners.
DISPLAY
R
A
DISPLAY
R
A
© 2011, Peerless Industries, Inc. All rights reserved.
www.peerlessmounts.com
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
Publicité
Table des Matières
