CAME GARD PX GPX40MGP Manuel D'installation page 69

Remove user
It removes one of the registered users.
Users management
Remove all
It removes all registered users.
Users management
Radio-frequency decoding
For choosing the type of radio coding of the transmitters enabled to control the operator.
Choosing the type of radio coding of the transmitters [Rolling code] or [TW key block], the transmitters with different type of radio coding previously
stored, will be deleted.
Users management
Boom length
Sets the boom length.
Configuration >
Motor settings
Motor test
Verification of the correct opening direction of the boom.
If the keys do not execute the commands correctly, invert the boom opening direction.
Configuration >
Motor settings
Travel calibration
It starts the travel self-learning.
Configuration >
Motor settings
Parameters reset
Restore factory settings except for the functions: [Radio decoding], [Boom type] and the settings related to the travel calibration.
Information
Maneuvers counter
For viewing the number of maneuvers made by the operator.
Total maneuvers = Maneuvers carried out from the moment of installation.
Partial maneuvers = Maneuvers carried out after the last one [Maintenance reset].
Information
Maintenance reset
Reset the count of the number of [Partial maneuvers].
Information
Remove user
Remove all
Radio-frequency decoding
Boom length
Motor test
Travel calibration
Parameters reset
Maneuvers counter
Maintenance reset
Use the arrows to choose the number associated with the user to be removed.
No.: 1 > 250
Alternatively, the control device associated with the user to be removed can be
activated.
Confirm? NO
Confirm? YES
Confirm? NO
Confirm? YES
All decoding (Default)
Rolling code
TW Key block
Confirm? NO
Confirm? YES
Up to 3 m
Up to 4 m
Jointed boom
The button > makes the motor turn in clockwise direction.
The button < makes the motor turn in a counter clockwise direction.
Confirm? NO
Confirm? YES
Confirm? NO
Confirm? YES
Total maneuvers
Partial maneuvers
Confirm? NO
Confirm? YES