Publicité
EN
[B]
- DELETING ALL PAIRINGS ON OXITURN LIGHT
1
Switch on OxiTurn by pressing
the button
Press and hold the button (at least
2
6s) until the button flashes
(pairing mode)
3
Press the button 3 times quickly
(within 4s)
[C]
- DELETING ALL PAIRINGS ON OXIMOTE
Press and hold the 2 buttons (at
1
least 4s) until they flash
(pairing mode)
Quickly press the left button
2
twice and the right button twice
(within 4s)
[D]
- MULTI-PAIRING
To connect an additional OxiBrake or OxiMote to your OxiTurn lighting, repeat the procedure
To connect an additional OxiTurn light to your OxiMote, repeat the procedure
1
orange
1
orange
2
3
2
[A]
.
=> If pairings are
correctly deleted:
- the button flashes
rapidly in
green
=> If pairings are
correctly deleted:
- buttons are
flashing in
orange
and
red
[A]
.
Publicité
