Test Procedure - Agri-Alert 9600 Mode D'emploi

2.3 TEST PROCEDURE

The system has the capability of testing certain functions from the keypad. To start
7
the test procedure, press the Test key. To skip a test in the sequence,
Test
press the forward arrow key .
Previous / Next
Outline of Test Procedure:
1 — TEST ARMED LED: The 'ARMED' LED on the front panelturns on for 2 seconds
and finally turns off.
2 — TEST LCD: The LCD backlight is turned on
3 — LCD BACKLIGHT OFF: The LCD backlight is turned off for 3 seconds.
4 — CONTRAST: The screen contrast is adjusted from 100% to 0%.
5 — The LCD display is tested by turning on each character matrix pixel.
6 — KEYPAD BACKLIGHT ON: The keypad backlight is turned on.
15
KP-400.rev.06