Hamilton Beach Professional Durathon 19573 Mode D'emploi page 7

Tips for Best Ironing Results
Fabric Facts and Labels:
Every fabric is different and should be treated accordingly. The label
inside clothing or linens should recommend fabric care instructions
that include ironing treatment. As a general rule, these instructions
should be followed. If the fabric is a blend, use a low temperature
setting. If you do not know what the content of the fabric is, use the
lowest temperature first and test on an inside seam.
Prepare to Iron:
1. Cover your ironing board with a padded, heat-resistant cover.
Brush or wipe off any dust, dirt, or debris so it doesn't end up on
your clothes.
2. To set the height of the ironing board, stand with your elbows
bent at right angles; then drop your hands slightly so that your
arms are in a comfortable position. Set the height of ironing
board to this height.
3. Check the soleplate (the surface of the iron that meets the fabric)
for mineral deposits or scorched material before you begin
ironing. If these deposits or minerals are left on the soleplate,
they may end up on your clothes. If you are unsure, test-glide
the iron on a rag or old towel first.
Fast Facts:
• Don't iron in a circular motion since this can stretch fabric.
Instead, iron lengthwise.
• Natural fibers such as cotton and linen should be ironed slightly
damp for faster, easier ironing. If they are completely dry, use
maximum steam while ironing or mist them with water prior to
ironing.
• Any portion of a garment that has two layers of fabric such as
pockets, seams, collars, and cuffs should be ironed inside out
first.
• To press a collar, iron from the points in using small strokes of
the iron. After wrinkles are pressed out, crease the collar into
place by hand—not with the iron. Treat French cuffs similarly,
gently creasing by hand after ironing.
Ironing Versus Pressing:
• You may have heard the terms "ironing" and "pressing" used
interchangeably, but they are quite different. When ironing, you
slide the iron back and forth over fabric. When pressing, the
iron is placed and held on the fabric in one spot, lifted up, and
this process is repeated until the areas that need attention are
smooth. A "pressing" technique is helpful to avoid stretching
fabrics.
• A pressing cloth can help reduce unwanted "shine" on fabrics.
You can purchase a pressing cloth in the laundry care section,
or a clean white dishtowel or 100% cotton pillowcase works
equally well. You do not need to increase the recommended iron
temperature when using a pressing cloth.
7