Hamilton Beach Professional Durathon 19573 Mode D'emploi page 2

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience
and knowledge, unless they are closely supervised and instructed
concerning use of the appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is used by or
near children. Cleaning and user maintenance shall not be made by
children unless they are supervised. Children should be supervised to
ensure that they do not play with the appliance.
4. Use appliance only for its intended use.
5. To avoid the risk of electric shock, do not immerse the iron in water or
other liquids.
6. Always return the temperature settings dial to MIN and press
OFF (I/ ) on the iron base before plugging in or unplugging the iron
base from the electrical outlet. Never pull on the cord to disconnect
the iron base from the electrical outlet; instead, grasp the plug and
pull on the plug to disconnect the iron base.
7. Do not let the cord or steam hose touch hot surfaces. Let the iron cool
completely before putting the iron away. Loop cord loosely around
iron for storing.
8. Always disconnect the iron base from the electrical outlet before filling
and emptying the water tank and when the iron is not in use.
This appliance is intended for household use only.
w WARNING Electrical Shock Hazard: This appliance is provided
with a polarized plug (one wide blade) to reduce the risk of electric
shock. The plug fits only one way into a polarized outlet. Do not defeat
the safety purpose of the plug by modifying the plug in any way or by
using an adapter. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, have an electrician replace the outlet.
2
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
Other Consumer Safety Information
9. Do not operate the iron with a damaged cord or in the event the iron
has been dropped or damaged or there are visible signs of damage or
it is leaking. To avoid the risk of electric shock, do not disassemble the
iron. Supply cord replacement and iron repairs must be conducted
by a qualified serviceman or the manufacturer. Incorrect assembly
might result in a risk of electric shock when the iron is used after
reassembly.
10. The iron must be rested only on the base provided.
11. When placing the iron on its base, ensure that the surface on which
the base is placed is stable.
12. Do not leave the iron unattended while the iron is connected or on an
ironing board.
13. Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a steam generator iron upside down—
there might be hot water in the tank.
14. To avoid a circuit overload, do not operate an iron on the same circuit
with another high-wattage appliance.
15. If an extension cord is absolutely necessary, a cord with an ampere
rating equal to or greater than the maximum rating of the iron shall
be used. A cord rated for less amperage can result in a risk of fire or
electric shock due to overheating. Care shall be taken to arrange the
cord so that it cannot be pulled or be tripped over.
16. The boiler cleaning valve must not be opened during use. Read Care
and Cleaning instructions carefully to avoid injury.
The length of the cord used on this appliance was selected to reduce
the hazards of becoming tangled in or tripping over a longer cord. If a
longer cord is necessary, an approved extension cord may be used.
The electrical rating of the extension cord must be equal to or greater
than the rating of the appliance. Care must be taken to arrange the
extension cord so that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally tripped over.