Technical Assistance Form - Conductivity - Consort R305 Mode D'emploi

If you need assistance with a technical problem, make sure to fill (in CAPITALS!) the
complete checklist (23 points!) and fax a copy to Consort: +32/14/429179.
1. purchase date:
2. indicate model:
R315
5. organisation:
6. name:
7. division:
8. address:
9. postal code:
11. telephone:
13. e-mail:
14. type of connected electrode:
15. store all conductivity electrodes in distilled water with some detergent overnight.
16. reset the meter (switch on while holding SET pressed).
17. leave the EC input open, select the conductivity mode and read display.
18. connect a 1000 ohm resistance to the conductivity input and read display.
19. select the °C mode, measure temperature of solutions and read the display.
20. rinse the conductivity electrode with a 0.01 M KCl calibration solution (1413 µS).
21. connect the conductivity electrode, dip in fresh cal. solution (stir!) and read display. µS:
22. rinse a new conductivity electrode with a 0.01 M KCl calibration solution (1413 µS). yes?
23. connect this conductivity electrode, dip in fresh cal. solution (stir!) and read display. µS:
R305 • R315
2. purchased from:
10. city:
12. telefax:
Perform the following steps:

Technical assistance form - Conductivity

4. serial no:
yes?
yes?
µS:
µS:
°C:
yes?
41 / 42